Differences

This shows you the differences between two versions of the page.

--- electronrt:userguide:tutorials:electron_beams [2020/12/04 15:32] – [Approach] kerhart
+++ electronrt:userguide:tutorials:electron_beams [2022/05/02 16:01] (current) – [Electron Beam Normalization] dpatenaude
@@ Line 2: / Line 2: @@
 In the Beams block users can manage all the beams, as well as any blocks, boluses, or other devices included with them, included in the plan. In addition, new beams can be created and added to the plan from here.
+**Note:** The Beams block will be disabled if no machine or CT curve exists in the site configuration.
 <imgcaption beams_1|Beams Block>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams.png?direct&400 }}</imgcaption>
@@ Line 13: / Line 15: @@
   * **Delete**: Remove this beam from the plan.
-<imgcaption beams_2|Existing Beam Example>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_editing_beam.png?direct&400 }}</imgcaption>
+<imgcaption beams_2|Existing Beam Example>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_block.png?direct&400 }}</imgcaption>
 The editing dialog allows the user to edit any property of the beams that is defined in the "Structure of a Beam" section below. All changes made in this section will be saved to the beam once the user selects "Done".
@@ Line 35: / Line 37: @@
 <imgcaption beams_5|General Block>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_manual_label.png?direct&400 }}</imgcaption>
-  * **Geometric Target**: Sets the target structure for this beam. Only "target" type structures will be available for selection in this list.
+  * **Geometric Target**: Sets the target structure for this beam. Only "target" type structures will be available for selection in this list. The following criteria must be met for structures to be able to be selected as a beam target:
-    * Once a geometric target has been set, the application will attempt to automatically calculate and set:
+    *  Structures flagged in the imported DICOM RT Structure Set with the following RT ROI Interpreted Type (3006,00A4):
+      * CTV
+      * GTV
+      * PTV
+      * CONTROL
+    * Structures with the following within their name:
+      * "ctv"
+      * "gtv"
+      * "ptv"
+      * "target"
+    * Refer to [[electronrt:userguide:tutorials:all_tutorials#course_structures|Editing a Course Structure]] to change a structure type
+Once a geometric target has been set, the application will attempt to automatically calculate and set:
       - **Beam Approach:** A computed best guess at an orthogonal beam approach. The gantry or couch angles will be snapped to 0 degrees if:
         - The gantry angle is less than 5.0 or greater than 355.0 degrees
-        - The couch angle is less than 10.0 and greater than -10.0 degrees
+        - The couch angle is less than 10.0 or greater than 350.0 degrees
-      - **Beam Energy:** The minimum commissioned energy with an R90 large enough to reach the deepest portion of the distal surface of the target
+      - **Beam Energy:** The minimum commissioned energy with an R90 large enough to reach the deepest portion of the distal surface of the target.
-      - **Block Size:** The smallest fitting block size enabled for the selected treatment machine
+      - **Beam Normalization:** If a matching [[electronrt:userguide:tutorials:all_tutorials#site_settings|normalization template]] is found this will automatically be applied.
+      - **Block Size:** The smallest fitting block size enabled for the selected treatment machine.
 <imgcaption beams_6|Geometric Target Options>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_target.png?direct&400 }}</imgcaption>
@@ Line 47: / Line 62: @@
 <imgcaption beams_7|UI updated with the new target>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_target_selected.png?direct&400 }}
 </imgcaption>
-  * **Description**: An optional description for the beam.
 Once the beam has a color, label, and target the user will be able to move on to the next block in the beam creation if this is a new beam.
@@ Line 59: / Line 73: @@
   * **Couch Angle**: Sets the Couch angle for the beam.
   * **Collimator Angle**: Sets the Collimator angle for the beam.
   * **SSD**: Sets the Source-to-surface distance.
+  * **Isocenter Shift**: Shifts the beam's isocenter. This shift is within the beam space coordinate system where the SSD is the beam "Z" shift. This can be used to manually shift a beam based on the center of the target.
 As the values are set and changed in the "Approach" Block you should see the image of the beam update in the UI.
@@ Line 68: / Line 83: @@
 ==== Energy Selection====
-In this block the user can set what energies are used for the dose calculations of this beam. Users are able to set:
+In this block the user can select the treatment energy for the beam. Users are able to set:
-  * **Planning Isodose:** The user can set the planning isodose level for the distal edge of the selected target.
+  * **Planning Isodose:** The user can set the planning isodose level (relative dose) for the distal edge of the selected target.
   * **Beam Energy:** The user is able to select an energy for this beam. This list of energies is derived from the machine data in the site configuration.
-<imgcaption beams_9|Energy selection block>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_energies_selection.png?direct&400 }}</imgcaption>
+<imgcaption beams_9|Energy Selection Block>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_energies_selection.png?direct&400 }}</imgcaption>
 This block also displays the following values that are calculated and are not editable.
-  * **Min Energy to Target:** The minimum energy necessary for the selected target.
+  * **Min Energy to Target:** The minimum energy necessary to reach the entire selected target.
-  * **Max PTV Depth (WED):** The maximum water equivalent depth.
+  * **Max PTV Depth (WED):** The maximum physical depth (and water equivalent depth) to the distal target surface.
-  * **R90:** The computed R90 value for this beam.
+  * **R##:** The computed beam range at the Planning Isodose level (range = depth of the point on the PDD at the Planning Isodose for a beam at the selected energy and specified field size).
-<imgcaption beams_10|Beams Block>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_energies.png?direct&400 }}</imgcaption>
+<imgcaption beams_10|Energy Selection Values>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_new_beam_energies.png?direct&400 }}</imgcaption>
+==== Electron Beam Normalization ====
+In this block the user can specify how the electron beam will be normalized. Absolute dose based normalization can be selected to scale the computed relative dose (%) to absolute (Gy) dose.
+If the Course is assigned a treatment site with a [[[electronrt:userguide:tutorials:all_tutorials#plan_defaults_templates|beam normalization template]] and the the selected geometric target is one of the prescription structures, the normalization will be set according to the template in the treatment site. If the the geometric target is not a prescription structure, the absolute dose value must be set by the user. Refer to [[electronrt:userguide:tutorials:all_tutorials#plan_defaults_templates|Editing the Site Settings]] to set a beam normalization template.
+<imgcaption beam_normalization|Absolute Dose Beam Normalization>{{ :electronrt:userguide:tutorials:absolute_dose_based_normalization.png?direct&400 |}}</imgcaption>
+If MU dose conversion tables exist in the machine selected for the plan, MU based normalization can be selected to scale the relative dose based on a user specified MU value per fraction. In this case, the absolute beam dose value is calculated based on the given MU value per fraction. MU dose conversion data tables can be imported in the [[:electronrt:userguide:tutorials:all_tutorials#machine_settings|Site Configuration Machine Settings]].
+<imgcaption beam_normalization|MU Based Beam Normalization>{{ :electronrt:userguide:tutorials:mu_based_normalization.png?direct&400 |}}</imgcaption>
+The eRT application provides the following options for absolute dose based normalization:
+  * **Location**: Normalize the dose to a small spherical volume surrounding a specific point.
+    * Users are able to specify the sphere's center point and radius.
+    * The average //Given Dose// within the specified sphere is computed and set to the //Absolute Beam Dose// value when normalizing the beam.
+    * The normalization sphere will be shown in the sliced views when this location-based normalization option is used.
+  * **Structure**: Normalize the dose to a structure from the imported DICOM Structure Set. The following structure options are available to normalize dose to a structure:
+    * **Min**: The minimum //Given Dose// within the specified structure is found and this value is set to the //Absolute Beam Dose// value.
+    * **Mean**: The average //Given Dose// within the specified structure is computed and this value is set to the //Absolute Beam Dose// value.
+    * **Vol**: The //Given Dose// covering the specified fraction of the structure is computed and this value is set to the //Absolute Beam Dose// value.
+  * **Isodose**: Set a specific //Given Dose// value to the //Absolute Beam Dose// value.
+<imgcaption beam_normalization_sphere|Location Normalization Sphere>{{ :electronrt:userguide:tutorials:decimal_electronrt_beams_normalization_sphere.png?direct&400 |}}</imgcaption>
+==== Collimation ====
+Here the user can add or edit an electron block for this beam. The user also has the option to add a skin collimator in addition to an electron block. More details on electron blocks can be found in the [[electronrt:userguide:tutorials:electron_blocks|Electron Block Creation]] section below. More details on skin collimator creation can be found in the [[electronrt:userguide:tutorials:skin_collimator|Skin Collimator Creation]] section below.
-==== Block ====
-Here the user can add or edit an electron block for this beam, more details on electron blocks can be found in the [[electronrt:userguide:tutorials:electron_blocks|Electron Block Creation]] section below.
 ==== Bolus ====
-Here the user can add or edit a bolus for this beam, more details on bolus creation can be found in the [[electronrt:userguide:tutorials:electron_bolus|Electron Bolus Creation]] section below.
+Here the user can add or edit a bolus for this beam, more details on bolus creation can be found in the [[electronrt:userguide:tutorials:electron_bolus|Electron Bolus Creation]] section below (Intensity Modulators can also be added here).