Differences

This shows you the differences between two versions of the page.

--- electronrt:userguide:tutorials:imaging [2020/12/04 17:38] – [Imaging] kerhart
+++ electronrt:userguide:tutorials:imaging [2021/07/29 18:28] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====== Imaging ======
-The Imaging block allows the user to choose or change the HU (Hounsfield Unit) to RSP (Relative Stopping Power) curve to use during the planning process. The user may also specify RSP overrides for existing structures in this block.
+The Imaging block allows the user to choose or change the HU (Hounsfield Unit) to RSP (Relative Stopping Power) curve to use during the planning process. The user may also specify Density/RSP overrides for existing structures in this block.
 ===== CT Curve =====
 The user can select the HU to RSP CT curve from a list of curves that exist within the site configuration. Refer to the [[:electronrt:userguide:tutorials:all_tutorials#ct_curves| Site Configuration Setup]] for managing the list of curves. If only one CT curve exists in the site configuration, it will be automatically selected when the plan is created. The selected HU to RSP curve will be displayed in the bottom right section of the display UI.