Differences

This shows you the differences between two versions of the page.

--- planning:userguide:tutorials:plan_templates [2018/09/26 18:46] – kerhart
+++ planning:userguide:tutorials:plan_templates [2021/07/29 18:28] (current) – external edit 127.0.0.1
@@ Line 20: / Line 20: @@
   - Click on the blue //Add Plan// link under the //Patient Model// to create a new plan
-  - From the Base Plan drop down menu choose the //Plan Template// that should be used and then click blue OK {{ :planning:userguide:tutorials:template.png?400 |}}
+  - From the //Base Plan// drop down menu choose the //Plan Template// that should be used and then click OK {{ :planning:userguide:tutorials:template.png?400 |}}
-  - Open the new plan and check that all plan parameters have been applied as expected
+  - Open the new plan and check that all plan parameters have been applied as expected (pay special attention to //explicit points// as described above)
   - Make any changes necessary within plan and then proceed with planning from this starting point
-  - If used well, you should be able to review the plan, make a few minor edits, and be at the point of running feasibility & optimization within just a few minutes
+  - If used well, you should be able to review the plan, make a few minor edits, and be at the point of running feasibility & optimization much faster than when starting from scratch