Differences

This shows you the differences between two versions of the page.

--- planning:userguide:walkthroughs:prostate_plan [2018/08/16 18:45] – [Constraints and Feasibility] mhenderson
+++ planning:userguide:walkthroughs:prostate_plan [2021/07/29 18:28] (current) – external edit 127.0.0.1
@@ Line 29: / Line 29: @@
 Prescription information is stored in the //Course// and must be added prior to making a treatment plan for a new patient.
-  - The patient opens directly after importing
+  - Open the patient after importing the CT and Structure Set
+  - Open the Patient Course (note: it will automatically open if the patient is freshly created)
   - Next proceed to //Prescriptions//
     - Select //Create New Prescription//{{ :planning:userguide:walkthroughs:pro_create_new_rx.png?400 |}}
@@ Line 142: / Line 143: @@
         - Add a min dose constraint of 79.2 Gy (1.8 Gy per fx)
         - Add a max dose constraint of 85.5 Gy
-      - At this point your //Fraction Group// should appear as shown below {{ :planning:userguide:walkthroughs:walkthrough_prostate_fg_complete.png?300 |}}
+      - At this point your //Fraction Group// should appear as shown below {{ :planning:userguide:walkthroughs:walkthrough_prostate_fg_complete.png?400 |}}
       - Click //Done// to complete the //Fraction Group//
@@ Line 158: / Line 159: @@
 </WRAP>
-      - Run the //Feasibility// by clicking the //calculate// link <WRAP center>{{ :planning:userguide:walkthroughs:pro23.png?300 |}}</WRAP>
+      - Run the //Feasibility// by clicking the //calculate// link <WRAP center>{{ :planning:userguide:walkthroughs:pro23.png?400 |}}</WRAP>
         - The feasibility should return as passing, if not, please confirm your plan parameters match those shown throughout this walkthrough and try again
       - Now with the target constraints set, we'll continue to add our OAR's
@@ Line 174: / Line 175: @@
         - //Objectives// are the goals that you would like to achieve and these will be the driving forces for the //Optimizer//
         - Expand the //Objectives / Optimizer// sub-block and then click //Edit// under the //Objectives// section
-        - For this example we will use the following objectives:
+        - For this example we will use the following objectives (Click the //Add structure// drop down menu to add the following)
           - The External_Body (Skin) will automatically populate
           - Rectum min_mean (Minimize the mean dose to the Rectum)
           - Testes min_max (Minimize the maximum dose to the Testes)
           - Left & Right Femur min_overdose 45 Gy (Minimize the amount of the structure the receives dose above 45 Gy)
-          - PTV min_max (Minimize the maximum dose within the PTV) {{ :planning:userguide:walkthroughs:pro_new_obj.png?400 |}}
+          - PTV min_max (Minimize the maximum dose within the PTV) {{ :planning:userguide:walkthroughs:optimizer_1.jpg?nolink&400 |}}
       - Click //OK// to complete the //Objectives//
-      - We are now ready to run the MCO, by opening the //Navigation// sub-block and clicking the //calculate// link
+      - We are now ready to run the MCO, by clicking the //calculate// link
         - This may take up to 10 minutes for this plan depending upon your available cloud services resources
         - Keep in mind that even though this process may take some time, the planner will be able to make adjustments easily in the Navigation without running a new plan
@@ Line 190: / Line 191: @@
     - If you find a plan that you like, but wish to continue exploring further, you can click the //Save// button to save the current slider state and then continue exploring
     - You may return to the last saved state at any time by clicking the //Reset// button
-    - The //Cancel// button will close the navigation block, reverting back to the last //Saved// state{{ :planning:userguide:walkthroughs:pro_new_navigation_sliders.png?400 |}}
+    - The //Cancel// button will close the navigation block, reverting back to the last //Saved// state{{ :planning:userguide:walkthroughs:navigation_1.jpg?nolink&400 |}}
   - The plan is ready for physician review at this point
     - Physicians often find it useful to Navigate the solution and explore trade-offs in real time, which can often alter the traditional physician approval process into an interactive, real-time trade-off analysis and on the spot plan approval